-
Details
• These are lighter than other terminators. Designed with golf Croquet in mind where you are (usually)playing just one ball.
• They are under 2lbs so you can play AC with them.
Horus Heads look like a block of wood??
• They clearly have a timber look…BUT/AND. the good stuff is all inside and hidden.
• This Cutaway shows how there is a large chunk of lead weighting hidden behind the striking face. This weight (at each end) gives the Horus some of the same properties of its big brothers. Terminal weighting that helps to keep them online.
• Double Nylon/Glassfibre striking faces are Tougher Traditional Tufnol AND they don’t absorb water.
• Those big stainless steel screws go through the first face and the face/screws bond/unify the timber/lead-weight/end…then the additoinal Nylon/Glassfibre end-face tidies up the whole thing.
• Your Horus is fully interchangeable with the CarbonX and the BlackBirds so you can upgrade whenever you are ready.
-
Details
If you play with: Soft Hands, Solomons, Arthritis, Tender Spots on finger joints, Then you will love the T-Mushroom. This is an addon to the top of your mallet and it takes all the strain out of having to GRIP(strangle) the handle. The Mushroom allows your hand to nestle at the top of the handle without any effort. The foam is softish and is a closed cell. Meaning that it will not absorb water or sunscreen. So, if it gets a bit grubby just wash it in the kitchen sink.
Textured top hand section allows water to disperse whilst increasing finger tip control.
Extra smooth sanded lower section allows free hand rotation.
-
Details
RAINBOWS are derived from the success in design and construction used in the BLACKBIRDS they benefit from the same high moment of inertia and the hard-wearing finish. So What.. Nearly all the weigh is in the ends SO if you play with soft hands and let the mallet do all the work .. they stay online.
The colour is the same as on your coloured window frames. Bonded to the aluminium and tough as goats teeth. The naked brass ends give maximum energy transfer to the ball/s and they look good too.
Customise Your Package Now
-
Details
Blackbird maximises the turning effort needed to steer the head off track. Solid brass fabricated ends with fine random tooling allow easy rotation of the “back ball”. You will find the satin black powdercoat finish is easy care and easy on your eyes.
Blackbird Terminator’s have a central sighting line.If you play with “Dawson” balls you will have noticed that they are a lot livelier than the older balls. A lighter mallet can provide some benefits.
The new brass heads (ends) which allows a weight adjustment of up to 7 ounces! while still maintaining physical integrity.
The body of the Blackbird mallet is an aluminium tube 50mm square. After all the machining is done they are powder coated, filled with a light-weight (closed cell) foam and assembled.
Standard weight for a 254mm (10″) Blackbird Normal is 1.030 Kg (2lb 4oz) LW is 0.91kg (2.0lbs)
Customise Your Package Now
-
Details
50mm Square carbon fibre tube. The Carbon fibre has 6 laminate layers and is still very light and incredibly strong. The carbon has 12 thousand filaments in each strand!
The ends are all brass, welded construction, and are faced with an injection moulded Nylon/glass fibre. You will notice the ends are black. They are in response to senior players who prefer a touch of “feel”.
The “Flywheel” effect is maximised by the combination of the Carbon body and the Terminal weighting of the brass ends. Because the body is so light and the ends are so (relatively) heavy, the center of gravity of each body half is approx 20mm in from the striking face.
The 50mm sq format is very kind round the hoops and the “Sweet Spot” is maximised.
Design your package with custom head lengths, grip types & lengths as well as the quicklock travel option.
-
Details
These balls have been used extensively around the world for over 15 years and are currently the only championship approved balls in production.
Exactly one pound in weight and 3 5/8″ in diameter they also have the perfect rebound.
The CQ-16 balls have been approved by the UK Croquet Association since 2000 for International level Championship play. They currently have championship approval from the UK Croquet Association and the WCF for use until November 2025.
Primary and secondary sets available.
-
Details
• These are lighter than other terminators. Designed with golf Croquet in mind where you are (usually)playing just one ball.
• They are under 2lbs so you can play AC with them.
Horus Heads look like a block of wood??
• They clearly have a timber look…BUT/AND. the good stuff is all inside and hidden.
• This Cutaway shows how there is a large chunk of lead weighting hidden behind the striking face. This weight (at each end) gives the Horus some of the same properties of its big brothers. Terminal weighting that helps to keep them online.
• Double Nylon/Glassfibre striking faces are Tougher Traditional Tufnol AND they don’t absorb water.
• Those big stainless steel screws go through the first face and the face/screws bond/unify the timber/lead-weight/end…then the additoinal Nylon/Glassfibre end-face tidies up the whole thing.
• Your Horus is fully interchangeable with the CarbonX and the BlackBirds so you can upgrade whenever you are ready. -
Details
End Face Kit
The end faces of your CarboXtreme are like the tyres on your car.
Even though they are “Tough as goats knees.” you might need to replace them from time-to-time.
The kit comes with:-
2 replacement faces complete with adhesive.
Instructions
Easy to replace takes about ten minutes.
YES… you can fit these to a Rainbow for that “extra bit of feel”If you want to fit these to some other mallet, send me an email or give me a call so I can give you the inside information
Free Shipping
-
Details
Uses the principles of a carpenters hammer for pulling out nails. Leverage. Not much bigger than a carpenter hammer so you can have one on each trolley. Your ladies will love them. Maybe one for each trolley. Used by your players to undress their lawn.
-
Details
Not a new idea but refined for speedy use. Tool-less adjustment, and strength. One per 4 lawns works well. Used by your lawns team
-
Details
The Q Sabot slides over the top of the hoop. Hidden in the top is 40mm of solid steel. That upper protects the hoop from being munted.
The steel sides front & back take all the stress off the adjustable top corners. One per 4 lawns is ideal. Used by your lawns team. -
Details
A Quadway Dibber (dibble) makes the precision holes in the ground for the hoops. Always the same hole spacing every time.
-
Details
Set of 6 Quadway hoops. Precision made and interchangeable. Please contact us if you want to order so we can work out the shipping for you.
