Please support the following links
-
If you play with: Soft Hands, Solomons, Arthritis, Tender Spots on finger joints, Then you will love the T-Mushroom. This is an addon to the top of your mallet and it takes all the strain out of having to GRIP(strangle) the handle. The Mushroom allows your hand to nestle at the top of the handle without any effort. The foam is softish and is a closed cell. Meaning that it will not absorb water or sunscreen. So, if it gets a bit grubby just wash it in the kitchen sink.
Textured top hand section allows water to disperse whilst increasing finger tip control.
Extra smooth sanded lower section allows free hand rotation.
-
RAINBOWS are derived from the success in design and construction used in the BLACKBIRDS they benefit from the same high moment of inertia and the hard-wearing finish. So What.. Nearly all the weigh is in the ends SO if you play with soft hands and let the mallet do all the work .. they stay online.
The colour is the same as on your coloured window frames. Bonded to the aluminium and tough as goats teeth. The naked brass ends give maximum energy transfer to the ball/s and they look good too.
Customise Your Package Now
-
Blackbird maximises the turning effort needed to steer the head off track. Solid brass fabricated ends with fine random tooling allow easy rotation of the “back ball”. You will find the satin black powdercoat finish is easy care and easy on your eyes.
Blackbird Terminator’s have a central sighting line.If you play with “Dawson” balls you will have noticed that they are a lot livelier than the older balls. A lighter mallet can provide some benefits.
The new brass heads (ends) which allows a weight adjustment of up to 7 ounces! while still maintaining physical integrity.
The body of the Blackbird mallet is an aluminium tube 50mm square. After all the machining is done they are powder coated, filled with a light-weight (closed cell) foam and assembled.
Standard weight for a 254mm (10″) Blackbird Normal is 1.030 Kg (2lb 4oz) LW is 0.91kg (2.0lbs)
Customise Your Package Now
-
50mm Square carbon fibre tube. The Carbon fibre has 6 laminate layers and is still very light and incredibly strong. The carbon has 12 thousand filaments in each strand!
The ends are all brass, welded construction, and are faced with an injection moulded Nylon/glass fibre. You will notice the ends are black. They are in response to senior players who prefer a touch of “feel”.
The “Flywheel” effect is maximised by the combination of the Carbon body and the Terminal weighting of the brass ends. Because the body is so light and the ends are so (relatively) heavy, the center of gravity of each body half is approx 20mm in from the striking face.
The 50mm sq format is very kind round the hoops and the “Sweet Spot” is maximised.
Design your package with custom head lengths, grip types & lengths as well as the quicklock travel option.
-
The STAR MALLET is a cost effective mallet to cater for the increasing number of players who are being attracted to the sport of Croquet. Our Kepler Edition has a round handle for easy grip and accurate shot making.
The solid all wood construction along with the 280mm wooden head produces more spin to get through hoops. The mallet feature an all weather grip with stainless steel faces. Each mallet is hand crafted and soaked in decking oil for 3 days, ensuring total protection from all weathers.
This mallet is great for all forms of Croquet. Especially Association, Ricochet & Golf Croquet.
Manufactured in Australia from locally sourced materials.
-
The revolutionary square handle design, makes gripping the mallet very easy and “squares” the player so you hit the ball straight.
The Star Mallet has been developed over two years of design and testing in Croquet Association and Golf Tournaments.
This has resulted in a mallet which weights 3lbs(1.4Kg), a preferred weight for competition play.
The weights are specially situated to provide a “lively” mallet head which eliminates “bounce back” when the ball is struck, leading to smooth straight shots.The all wood construction eliminates any moving parts and therefore maintenance is minimal.
The point where the handle connects to the mallet head is very solid and provides no flexibility; this has proved to be a tremendous plus for the Star Mallet, as the shot is executed the way you play it with no extra movement from the design.The all-weather grip eliminates any problems handling the mallet in wet weather.
The head design provides tremendous forward spin when you follow through with your hoop shot enabling you to make hoops more easily. Also works extremely well for jump shots.
The forward spin produced by the mallet head, tends to move the ball you are jumping back from the hoop rather than going through for the opponent.
-
End Face Kit
The end faces of your CarboXtreme are like the tyres on your car.
Even though they are “Tough as goats knees.” you might need to replace them from time-to-time.
The kit comes with:-
2 replacement faces complete with adhesive.
Instructions
Easy to replace takes about ten minutes.
YES… you can fit these to a Rainbow for that “extra bit of feel”If you want to fit these to some other mallet, send me an email or give me a call so I can give you the inside information
Free Shipping
-
Uses the principles of a carpenters hammer for pulling out nails. Leverage. Not much bigger than a carpenter hammer so you can have one on each trolley. Your ladies will love them. Maybe one for each trolley. Used by your players to undress their lawn.
-
Not a new idea but refined for speedy use. Tool-less adjustment, and strength. One per 4 lawns works well. Used by your lawns team
-
The Q Sabot slides over the top of the hoop. Hidden in the top is 40mm of solid steel. That upper protects the hoop from being munted.
The steel sides front & back take all the stress off the adjustable top corners. One per 4 lawns is ideal. Used by your lawns team. -
A Quadway Dibber (dibble) makes the precision holes in the ground for the hoops. Always the same hole spacing every time.
-
Set of 6 Quadway hoops. Precision made and interchangeable. Please contact us if you want to order so we can work out the shipping for you.
-
If you play with: Soft Hands, Solomons, Arthritis, Tender Spots on finger joints, Then you will love the T-Mushroom. This is an addon to the top of your mallet and it takes all the strain out of having to GRIP(strangle) the handle. The Mushroom allows your hand to nestle at the top of the handle without any effort. The foam is softish and is a closed cell. Meaning that it will not absorb water or sunscreen. So, if it gets a bit grubby just wash it in the kitchen sink.
Textured top hand section allows water to disperse whilst increasing finger tip control.
Extra smooth sanded lower section allows free hand rotation.
-
RAINBOWS are derived from the success in design and construction used in the BLACKBIRDS they benefit from the same high moment of inertia and the hard-wearing finish. So What.. Nearly all the weigh is in the ends SO if you play with soft hands and let the mallet do all the work .. they stay online.
The colour is the same as on your coloured window frames. Bonded to the aluminium and tough as goats teeth. The naked brass ends give maximum energy transfer to the ball/s and they look good too.
Customise Your Package Now
Product Search
Product Categories
HAPPY CUSTOMERS
Received our mallets yesterday thank you. Had a little try today and are very happy, thanks again.
Cart
- No products in the cart.